| 320KV4601 NSK Four-Row Tapered Roller Bearing | J min.:209.55 mm; L:266.7 mm; Basic dynamic load rating C:193 kN; H1:69.85 mm; da:63.5 mm; A:73.025 mm; S:0.794 mm; J max.:222.25 mm; B:65.484 mm; Limiting speed:3800 r/min; H:144.463 mm; H2:41.275 mm; Attachment bolt diameter G:15.875 mm; s:32.941 mm; Mass bearing unit:8.39 kg; |
| 260KV895 NSK Four-Row Tapered Roller Bearing | Accessories:Without Accessories; Sealed Speed Rating n3:3000 rpm; B:22.00 mm; Basic Static Radial Load Rating Co:45000 N; Basic Dynamic Radial Load Rating C:52700 N; Oil Speed Rating Open/Shielded n2:6000 rpm; Grease Speed Rating Open/Shielded n1:5000 rpm; d:85.000 mm; D:130.0000 mm; Fillet Radius ra:1.00 mm; |
| 294/71 NSK THRUST SPHERICAL ROLLER BEARING | Basic Static Radial Load Rating Co:132000 N; D:180.0000 mm; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; d:85.000 mm; Basic Dynamic Radial Load Rating C:153000 N; B:41.00 mm; |
| 300KV5001 NSK Four-Row Tapered Roller Bearing | Basic Radial Load Rating-Static SCO:8000 N; D:52.0000 mm; Basic Interchange BCA:88505; Width - Inner Ring B1:16.70 mm; d:25.000 mm; Width - Outer Ring B0:15.0 mm; Speed Rating-Single and Double Sealed Grease SDG:8500 rpm; Old MRC Bearing Number:205FFS; Fillet Radius ra:1.00 mm; Accessories:88000 Two Seals; Basic Radial Load Rating-Dynamic DC:14000 N; Basic Interchange FAF:205KLL2; Width - Overall B:16.7 mm; |
| 300KV4302 NSK Four-Row Tapered Roller Bearing | D:850 mm; Basic dynamic load rating C:2200 kN; ra max.:3 mm; d1:845 mm; H:85 mm; Basic static load rating C0:15000 kN; d:710 mm; Fatigue load limit Pu:900 kN; D1:715 mm; r1,2 min.:4 mm; Da max.:744 mm; B:24.5 mm; Limiting speed:400 r/min; Reference speed:200 r/min; Minimum axial load factor A:18; Mass bearing:95 kg; da min.:816 mm; |
| 29292 NSK THRUST SPHERICAL ROLLER BEARING | N:8.8 mm; D:115 mm; H1:36 mm; Basic dynamic load rating C:80 kN; Attainable speed:2000 r/min; r1,2 min.:0.6 mm; Static moment stiffness:880 N·m/mrad; r3,4 min.:0.6 mm; Required attachment bolt size (DIN 912):M8; Angle between bolts and thread holes α/2:15 °; a:135 mm; Frictional moment:1.3 N·m; D2:80 mm; Mass bearing:2.6 kg; Fatigue load limit Pu:6.4 kN; Da max.:80 mm; ra max.:0.6 mm; |
| 150KV895 NSK Four-Row Tapered Roller Bearing | r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; Mass rod end:0.53 kg; l1 min.:53 mm; d:25 mm; Basic dynamic load rating C:48 kN; B:20 mm; Material constant KM:330; Basic static load rating C0:78 kN; α:7 °; dk:35.5 mm; C1 max.:18 mm; l2 max.:128 mm; d2 max.:65 mm; h:94 mm; l7 min.:30 mm; G:M 24x2; |
| 139KV2051 NSK Four-Row Tapered Roller Bearing | J6:1070 mm; P55°:9600 kN; bc:243.5 mm; db:410 mm; Q120°:5800 kN; N1:48 mm; Cap bolt, size:M 42x280; Appropriate attachment bolt, rec. tightening torque:3640 N·m; A1:420 mm; H2:130 mm; Bearing (basic designation):23276; Eye bolt, size:2 x M 42; Appropriate attachment bolt, size G:42 mm; A:460 mm; Labyrinth seal:2 x TS 92/410; ba max.:238 mm; s:35 mm; Initial grease fill, 40%:12.5 kg; |